Wafab 6ft Stainless Steel Wet Bench

Wafab 6ft Stainless Steel Wet Bench

ID #:






1 ea.   72-inch length Stainless Steel (304), Front Access Wet Bench, with deck top and tank rails, leg levelers and casters, Photohelic exhaust gauge and MPC901 EMO controller and fluorescent lighting.  Front hinged and lock-in-place shields protect operators from chemical splashing.  

Dimensions:  72L x 40D x 75H, inches

 4 ea.   Heated Process tanks –  Wafab stainless steel (316) process tanks –heated (80C), static.    Each tank is operated independently of each other. Dimension: 8W x 10L x 14D, inches.

 2 ea.   Mechanical Lift Robot Arms - Pneumatically operated lift device will raise and lower customer cassette in and out of process tank.  Customer cassettes are placed on carrier tray by operators and then activated through activation switch on the head case.

 1 ea.  SB4561-04 Stainless steel (316) static, ambient process bath with pneumatic drain valve and activation switch on the head case.

 4 ea.   Temperature Controllers – digital read-out, multi-function type with drain capabilities.

1 ea.   Polypropylene Quick Dump Rinser - Includes four-sided cascading inner weir, top adjustable spray rails, external bottom fill rails, polypropylene pneumatic DI water valves, Polypropylene plumbing lines, pneumatic dump door with Viton O-ring seal and lid.

1 ea.   QDR Controller -For Quick Dump Rinser

1 ea.   Digital countdown timers -  (minutes : seconds) with alarm for ambient static tanks

 2 ea.   N2 and DIW gun set

1 ea.   Fire Suppression System - More details on the Fire Suppression System are listed  a few
paragraphs below.

1 ea.   Polypropylene Utility sink with gooseneck (New), Dimensions: 10x10x10D, inches

1 ea.   Stainless steel cup sink , 4x4x4 inches, with drain line to common solvent tank drain – all solvent drains are tied together and will come out at one single common drain at the rear of the bench.


FM 4910 approved CO2 fire detection and suppression system with electro polished 316 stainless steel spray nozzles, IR detectors, main control panel, manual pull station, strobe light with audible alarm and electrical discharge head.


System is being sold As-Is / Where-Is

ClassOne Equipment will ship via FedEx, UPS, DHL and/or your desired shipping company. For larger items we will ship via one of our partnered shipping companies who are experienced with handling sensitive semiconductor manufacturing equipment.

All orders are shipped from Atlanta, Georgia USA. Availability and lead-times are based on current conditions and are subject to change depending on in-house demand at time of ordering. We estimate the shipping and delivery dates based on the availability of your parts as well as the shipping options you have chosen. Rush orders will ship the same-day that they are received, if received by 2:30 PM EST. There is a $100.00 USD charge for all rush orders requested. All international shipping import duties and taxes are the responsibility of the purchaser. ClassOne Equipment charges sales tax for items shipped to CA, GA, MI, TX, and MT.

ClassOne Equipment warrants all non-consumable parts for 90 days (unless otherwise stated). This warranty commences upon documented delivery.

This warranty does not apply to defects caused by negligence, improper installation, misuse, unauthorized repair, accident or alteration by the purchaser, or damage during shipping. This warranty does not cover consumable parts. No other warranty is made, expressed or implied, statutory or otherwise.

For all return information and authorization (including RMA #), please contact ClassOne Equipment at +1-770-808-8708 or support@ClassOneEquipment.com.

Please have your Sales Order number or Invoice number available to expedite the return process.

Please note the following important information: (a) all returns must include all original, undamaged items in their original packaging; (b) all items must be in the same condition as received; (c) shipping and handling fees are non-refundable; (d) purchaser is responsible for all return shipping costs (including international shipping import/export duties and taxes).

Returned items must meet ClassOne Equipment inspection standards for credit to be issued.