Rena Electroplating Wet Bench

Rena Electroplating Wet Bench

ID #:

4090

Manufacturer:

RENA

Model:

Electroplating Wet Bench

Vintage:

2009

Max Wafer:

150mm

Configuration:

Electroplating Wet Bench, manual wafer loading, currently configured for 6" wafers (8" wafer capable)

DETAILS:

RENA ELECTROPLATING WET BENCH consisting of:
   
1. General
− Currently set for 6" wafers
- Capable of 8" wafers
− 1 Copper (Cu) Plating Chamber
- 1 Tin (Sn) Plating Chamber
− 1 QDR Rinsing Module
 
2. Main Body
− 1 mainbody made of fire retardant white PPs
− Dimensions: width ca. 1400 mm, depth ca. 1550 mm, height ca. 2050 mm
 
3. Cu ECD Process Unit

3.1 Process Chamber
− Preparation for the use of a Cu plate as soluble anode
− Drag-out tank with manual valves for filling / draining of DIW installed in front of the process chamber
− All relevant process parameters for optimizing the deposition uniformity, such as plating current, electrolyte flow, temperature, rotation speed are adjustable and controlled by the PLC. The distance between process chamber and wafer is mechanically adjustable. All means for optimization of the uniformity are included in
the basic configuration

3.2 Chamber lid
− Chamber lid with rotation function
− Rotation 10 – 50 1/min
− Quick lock device for easy mounting of the substrate holder

3.3 Circulation system
− Storage tank, volume >25l
− Electrolyte volume in the system 15 – 25l
− 4 sensors for checking the liquid level in the tank
− Automatic refilling of DI-water
− 2 PT 100 units for temperature control ±1°
− Teflon heater installed in the storage tank
− Temperature 30 - 65°C
− Heat exchanger installed in the storage tank for connection to external cooling water system, lower temperature limit depending on cooling water
− OPTION: External heating / cooling device for temperature 15 - 60°C
− Manual filling of the electrolyte chemistry
− Circulation system consisting of:
  - Pump, max flow rate > 30 l/min with DIW without filter
  - Flow meter, min flow rate > 5 l/min
  - 10“ filter housing, 1 filter with 1 μm pore size included
 
4. Cu ECD Process Unit

4.1 Process chamber
− Preparation for the use of a Sn plate as soluble anode
− Distance between cathode and anode variable, max ca. 200 mm
− Force line aperture for 6” wafers
− Drag-out tank with manual valves for filling / draining of DIW installed in front of the process chamber
− All relevant process parameters for optimizing the deposition uniformity, such as plating current, electrolyte flow, temperature, rotation speed are adjustable and controlled by the PLC. The distance between process chamber and wafer is mechanically adjustable. All means for optimization of the uniformity are included in
the basic configuration

4.2 Chamber lid
− Chamber lid with rotation function
− Rotation 10 – 50 1/min
− Quick lock device for easy mounting of the substrate holder

4.3 Circulation system
− Storage tank, volume >25l
− OPTION (not included): storage tank volume 50l
− Electrolyte volume in the system 15 – 25l
− 4 sensors for checking the liquid level in the tank
− automatic refilling of DI-water
− 2 PT 100 units for temperature control ±1°
− Teflon heater installed in the storage tank
− Temperature 30 - 65°C
− Manual filling of the electrolyte chemistry
− Circulation system consisting of:
− Pump, max flow rate > 40 l/min with DIW without filter
− Flow meter, min flow rate > 5 l/min
− 10“ filter housing, 1 filter with 1 μm pore size included

 
5. Rinsing module
− With quick dump rinse (QDR)
− 1 DIW-gun
− Resistivity check at the drain
− N2-gun
 
6. Electrical control and software
− Cu: 1 forward/reverse pulse power supply by PLATING ELECTRONIC, type pe86, working range 20V / 5A effective / 15A pulse, ripple < 0.3% of max. effective current (=9mA)
− Sn: 1 forward/reverse pulse power supply by PLATING ELECTRONIC, type pe86, working range 20V / 3A effective / 15A pulse, ripple < 0.3% of max. effective current (=9mA)
− PLC
− Software with operator, process, and service modes
− Password protection
− Storage capacity for up to 20 recipes (per plating module) with 5 process steps per recipe
 
- Vintage 2009
- S/N: 090714/11601

CONDITION:

As-Is / Where-Is Condition. 

ClassOne Equipment will ship via FedEx, UPS, DHL and/or your desired shipping company. For larger items we will ship via one of our partnered shipping companies who are experienced with handling sensitive semiconductor manufacturing equipment.

All orders are shipped EXW from Atlanta, Georgia USA. Availability and lead-times are based on current conditions and are subject to change depending on in-house demand at time of ordering. We estimate the shipping and delivery dates based on the availability of your parts as well as the shipping options you have chosen. Rush orders will ship the same-day that they are received, if received by 2:30 PM ET. There is an expedite fee for all rush orders requested. All international shipping are shipped EXW and import duties and taxes are the responsibility of the purchaser. ClassOne Equipment charges sales tax for items shipped to CA, GA, MI, TX, and MT.

ClassOne Equipment warrants all non-consumable parts for 90 days (unless otherwise stated). This warranty commences upon documented delivery.

This warranty does not apply to defects caused by negligence, improper installation, misuse, unauthorized repair, accident or alteration by the purchaser, or damage during shipping. This warranty does not cover consumable parts. No other warranty is made, expressed or implied, statutory or otherwise.

For all return information and authorization (including RMA #), please contact ClassOne Equipment at +1-770-808-8708 or support@ClassOneEquipment.com.

Please have your Sales Order number or Invoice number available to expedite the return process.

Please note the following important information: (a) all returns must include all original, undamaged items in their original packaging; (b) all items must be in the same condition as received; (c) shipping and handling fees are non-refundable; (d) purchaser is responsible for all return shipping costs (including international shipping import/export duties and taxes).

Returned items must meet ClassOne Equipment inspection standards for credit to be issued.