Browse by Category

• Process Equipment
  • Wet Benches
  • Mask Aligners
  • Spin Rinse Dryers
  • Photoresist Coating
  • Polishing Systems
  • Deposition Systems
  • Dicing Systems
  • Etching Systems
  • Other Process
• Metrology Equipment
  • Thin Film Measurement
  • Surface Metrology
  • Defect Inspection
  • Scanning Microscopes
  • Inspection Microscopes
  • Stereozoom Microscopes
  • Probe Stations
• Other Equipment
  • Assembly Equipment
  • Facilities Support
  • Test Equipment
• New Arrivals

Home ›  Process Equipment › Other Process

Other Process

	Manufacturer	Model	Configuration	Price
	AG Associates	Heatpulse 610 RTA System	Rapid Thermal Annealer, up to 6""/150mm wafer capable	CALL
	Axcelis	Fusion 200 PCU Photostabilizer	Setup for 200mm/8"" Wafers, Software Version 3.271, Thermal Chuck	CALL
	Axcelis	Fusion 200 PCU System	Setup for 200mm Wafers, UV Bake Process	CALL
	Blue M	DCC-146C Oven	250 deg C. Max Temp, 10 1/2 x 14 x 13 1/2"" Inside Dimensions	CALL
	Blue M	DCC-206B Oven	250 deg C. Max Temp, 16 in. L x 18 in. W x 19.5 in., 2 Shelf	CALL
	Cascade TEK	TBO-1 Forced Air Oven	Forced Air Oven, 300 Deg C Max, Watlow 981 Controller	CALL
	Cascade Tek	TBO-1 Forced Air Oven	Forced Air Oven, 300 Deg C Max, Watlow 981 Controller	CALL
	Cascade Tek	TBO-1 Forced Air Oven	Forced Air Oven, 300 Deg C Max, Watlow 981 Controller	CALL
	CEE	1000 Hotplate	Programmable, vacuum chuck, 2 & 3-inch wafer selectable	CALL
	ClassOne	Granite Vibration Isolation Table	4ft x 3ft Granite Vibration Isolation Table	CALL
	Despatch	LCC1-11-2 Cleanroom Oven	Class 100 Cleanroom Oven, 260C/500F Max Temperature, Digital Temperature Control (1426)	CALL
	Despatch	LCC1-11-2 Cleanroom Oven	Class 100 Cleanroom Oven, 260C/500F Max Temperature, Digital Temperature Control (1426)	CALL
	Irvine Optical	Wafer Transfer System	Irvine Optical Wafer Transfer System	CALL
	K&S	4124 Ball Wire Bonder	Thermosonic ball bonder, B&L Stereozoom, Workholder, fully refurbished	$8,500.00
	K&S	K&S 1478 Automatic Wire Wedge Bonder	K&S 1478 Automatic Wire Wege Bonder	CALL
	Lapmaster	Accupol 12 Lapping & Polishing Jig	Series A, Mitutoyo Digital Micrometer, 3"" vacuum chuck, adjustable spring tension	$3,500.00
	Lapmaster	Accupol 12 Lapping & Polishing Jig	Series A, Mitutoyo Digital Micrometer, 3"" vacuum chuck, adjustable spring tension	$3,500.00
	Lindberg	Type 54357 Tube Furnace	2"" diameter, 3280 Watts, Max Temperature: 1200 degrees C	$3,750.00
	Lindberg/Blue M	Tube Furnace	Temperature Range: 1100C	CALL
	Lindberg/Blue M	Tube Furnace	Maximum Temperature: 1100C	CALL
	Linetool	Model A-RH Translation Stage	Model A-RH Translation Stage, Right handed version, 3 micrometers included (1233)	$650.00
	Linetool	Model A-RH Translation Stage	Model A-LH Translation Stage, Left handed version, 3 micrometers included (1234)	$650.00
	Logitech	Angular Adjustment Assembly	Angular Adjustment Assembly for PP5 Jigs	$450.00
	Logitech	Bench Stand	for PP5/PP6 Jigs, Brand New (P-5053, P-5054, P-5055)	$210.00
	Logitech	Bench Stand	for PP5/PP6 Jigs, Brand New (P-5053, P-5054, P-5055)	$210.00
	Logitech	Bench Stand	for PP5/PP6 Jigs, Brand New (P-5053, P-5054, P-5055)	$210.00
	Logitech	Bench Stand	for PP5/PP6 Jigs, Brand New (P-5053, P-5054, P-5055)	$210.00
	Logitech	CPM2 Chemical Polisher	CPM2 Chemical Polisher (1312)	CALL
	Logitech	LP50 Lapping Plate	Glass, 35cm, Radial Grooves, Lift-Off Plate (P-5042)	$1,450.00
	Logitech	PM5 Lapping & Polishing System	Chemlox resistant, 1 Plate, 1 Abrasive Autofeed Cylinder, 1 Roller Arm included	CALL
	Logitech	PM5 Lapping Plate	Expanded Polyurethane, 30cm (P-5044)	$1,450.00
	Logitech	SDG1 Single Dial Guage	Model: SDG1, Single Dial Guage, Logitech analog guage	$1,250.00
	Logitech	Single Dial Guage	Single Dial Guage (1596)	$750.00
	Logitech	VS2 Vacuum Unit	2-Port Vacuum System, chemlox resistant (1584)	CALL
	Mactronix	Eureka III Jr. UKA-625 Wafer Transfer System	Mactronix Wafer Transfer System	CALL
	MEI	1204B Wire Bonder	Ball Bonder, Leica Stereozoom 4, Heated Workholder, Negative EFO Controller	$9,500.00
	MEI	202 Bond Pull Tester	Reliable bond pull system for use in R&D applications (1822)	$4,450.00
	MEI	5C Wedge Bonder	Bausch & Lomb Stereozoom Microscope: 0.7-3x zoom, 10x Eyepieces	$6,500.00
	MEI	709 Die Mounter	Designed for eutectic die attaching ICs, transistors, and other small components to substrates and packages, with or without preforms	$6,500.00
	Memmert	U26 Laboratory Oven	up to 220C capable, 1 shelf (1362, 1363)	$750.00
	Newport	561D-XZ Stage	561D-XZ Stage, with two micrometers, Newport rail (1232)	$650.00
	Newport	562F-Tilt Tip-Tilt Platform	562F-Tilt Tip-Tilt Platform, for use with 562-XYZ Positioning Stage, Brand New (1276)	$225.00
	Semitool	Storm II Box Washer Cassette & Pod Cleaning System	Semitool Storm II Box Washer Cassette & Pod Cleaning System	CALL
	So-Low	Ultra Low CH43-5 Freezer	32F to -45F, 22 x 16 x 28""	CALL
	SSEC	156-17 Mask Cleaning System	Mask/Reticle/Plate Cleaning Machine for up to 6""/150mm wafers	$2,500.00
	Stainless Steel	Isolation Table	4ft x 4ft Stainless Steel Vibration Isolation Table	$1,850.00
	Stainless Steel	Isolation Table	4ft x 4ft Stainless Steel Vibration Isolation Table	$1,850.00
	Stainless Steel	Stainless Steel Isolation Table	Stainless Steel Construction, Dimensions: 35 3/4"" x 47 3/4"" x 35 7/8""	$2,250.00
	Sumitomo	Type-37 Fusion Splicer	Current Arc Count 136, sold with brand new electrodes, Manufactured in 2004!	CALL
	Tek-Vac Vactronic	LPE-4750 Liquid-Phase Epitaxial Reactor	Liquid-Phase Epitaxial Reactor	CALL
	Ultratech	602 Mask Cleaner	High-pressure water jet for effective rinse	CALL
	Unitek Miyachi	LW-52 Yag Laser Welder	Unitek Miyachi LW-52 Yag Laser Welder	CALL
	VWR	1350GM Gravity Oven	Gravity Oven, 250 deg C Max, 4.0 Cubic Feet	CALL
	VWR	1350GM Gravity Oven	VWR 1350GM Gravity Oven, 250 deg C Max, 4.0 Cubic Feet	CALL
	VWR	1430M Vacuum Oven	VWR 1430M Vacuum Oven, 3 shelves, 260 deg C	CALL
	VWR	1430M Vacuum Oven	Vacuum Oven, 3 shelves, 260 deg C max	CALL
	Web Technology	6000 Bubble Tester	Web Technology 6000 Bubble Tester	$3,950.00
	Yield Engineering	YES-450PB Polymide Bake Oven	8 cassettes of 6"" wafers or 12 cassettes of 4"" Wafers, Temperature Range: 25-450 deg C, Programmable controller	CALL
	Yield Engineering	YES-6 Vapor-Prime Vacuum-Bake Oven	HMDS Vapor-Prime Vacuum-Bake Oven, 150mm wafer capable, holds 8 cassettes of 6"" wafers	CALL
	Zephyrtronics	Airmill ZT-5100	Airmill ZT-5100 Auto Dispensing System, with digital pulse timer and adjustable air pressure (1133)	$350.00